How to set the volume in DataWedge software

Here is how to change the volume of the scan beep in DataWedge:

Tap DataWedge icon to configure scanner:


Tap "Advance Configuration":


Tap "Profiles":


Tap "Profile0":


Tap "Input":


Tap "Scanner":


Tap the default scanner (i.e. the one checked):


Tap "Feedback":


Tap "Good Decode":


Tap "Beeper":


Tap Volume:


The volume must be between 0 (softest) and 3 (loudest):


Please make SURE to follow the menus BACK or tap HOME to save your changes. Tapping "X" will NOT save your changes.

More information on DataWedge is available here