Jargon Software Jargonsoft Help Desk Knowledgebase Hardware
Motorola Symbol
Suggested knowledgebase articles:

Knowledgebase Hardware Motorola Symbol

MC5040
ES400
MC65
MC70
MC55

Articles in this category

ES400 or MC65 Flash ROM upgrade (page good for many Symbol products)

Flashing the ROM is the only way to do a cold reset for an ES400 or MC65. Instructions: Copy contents of zip file to SD car or to \Temp folder. Execute StartUpdLdr.exe or cold boot terminal by pr...

12,807
(931)
DataWedge v3.3

Download, upzip, and install attached. download page for DataWedge: http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=12948&sliceId=&dialogID=332318431&...

3,630
(763)
Initial Fusion settings needed for MC55

The Fusion wi-fi in the MC55 needs the following initial configuration to work properly. Once these settings are done, they do NOT need to be repeated. They will persist after a warm reset. H...

3,300
(751)
Setting the confirmation scan sound using DataWedge on MC5040

DataWedge version 3 runs fine on an MC5040 but since it uses Pocket IE for all param settings, and since Pocket IE on an MC5040 does not have the features required by DataWedge v3, those options are...

4,780
(668)
How to set the volume in DataWedge software

Here is how to change the volume of the scan beep in DataWedge: Tap DataWedge icon to configure scanner: Tap "Advance Configuration": Tap "Profiles":

15,472
(1,176)
How to make a WPA connection using Symbol Fusion Radio

The Fusion wi-fi can be set to work with WPA secured wi-fi hotspots, such as those found in most homes and many businesses. Here is what you need to do: Tap the Start button, scroll down to...

1,479
(690)
How to fix DataWedge not automatically starting

DataWedge v3.3 sometimes will not automatically start. It can be manually started by going into DataWedge and tapping "run". To avoid having to do this, please follow these instructions: 1. ...

12,033
(1,255)
MC65 - ES400- How to make automatic WLAN connection

1. Copy the attached .reg to \application folder. Use AlwaysOnSprint.reg for devices using Sprint service. Use AlwaysOnVerizon.reg for devices using Verizon service. 2. Using File Explorer, go...

930
(700)
DataWedge Pick List Mode

When bar codes are presented in a list on printed pages from which to scan, sometimes the scanner will read a bar code adjacent to the desired bar code. This can results in errors. To eliminate this ...

5,704
(1,030)
Motorola Black Box recorder logging app for diagnostic use with tech support

For use with Motorola Support for troubleshooting intermittent problems This tool logs the activity on your device All you need to do is deploy this .cab file to your device, by 1) Copy the .cab fi...

5,427
(662)
How to Re-flash your Motorola Device

  Useful YouTube video: https://www.youtube.com/watch?v=ssEx6bqFtRg   submitted by Josue Ferret  (josue@epictaleproductions.com) 

563
(615)
MC55, MC65 How to Defeat Sleep mode on Battery Power

 1. Tap Start button, then tap Settings:

1,257
(667)
Sound not working when scanning using Motorola DataWedge

NOTE:  The latest version of DataWedge (v3.3.19) must be used. It contains a volume control needed to set the scan beep volume) Install link:  http://www.jargonsoft.com/rdr/motorola/datawed...

15,880
(983)
How to improve sluggish DataWedge scan performance

Sometimes poor DataWedge scan performance can be improved by resetting DEFAULT values (then setting specific params again as needed). Here's how:  

565
(619)